Troubleshooting • Re: Pi 5 8gig not rebooting but cold booting ok
Forgive me, I should have mentioned that I'm using the official supply for the Pi 5 that was shipped with the unit; I have a 4 and a 5 and tried swapping them around to see if there was any...
View ArticleTroubleshooting • Re: Random Pi login screen
I think I figured it out. Somehow the instructions I was following to install Picframe ended up installing a second copy in a different virtual session of Python. The second login screen was for that...
View ArticleTroubleshooting • AX88179B based Ethernet USB cable
From dmsg :[ 2723.010067] usb 3-1: new high-speed USB device number 4 using xhci-hcd[ 2723.154148] usb 3-1: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 2.00[ 2723.154157] usb 3-1:...
View ArticleTroubleshooting • Re: AX88179B based Ethernet USB cable
Ref: viewtopic.php?p=2306867#p2306867Statistics: Posted by B.Goode — Wed Apr 02, 2025 5:43 pm
View ArticleClik here to view.
Troubleshooting • Re: Moving Linux Kernel to 6.12
Hello aBugsWorstNightmare,Did you do something special to the panel-mipi-dbi source, to make it work with Linux 6.12?I am trying to update my Orange Pi Zero 3 from Armbian Linux 6.11 to Linux 6.12,...
View ArticleTroubleshooting • Re: Observations of a Raspberry Pi 5 and hypotheses...
Of course you're right, the mouse doesn't need to be moved and it wasn't. I don't know what caused the cursor to be unhidden, this shouldn't occur during the playback of a video file. I have seen...
View ArticleTroubleshooting • Re: Deleted Data
Hi! I just experienced this again, but with MinecraftPi. I shut the Pi down and waited for it to turn off before unplugging it, but next time I booted it my world had been completely deleted. I guess...
View ArticleClik here to view.
Troubleshooting • Re: No touch on Adafruit 2.8" PiTFT Capacitive Touch...
Ensure you are looking at the capacitive version of the display. Compare the bottom image on https://thepihut.com/products/adafruit- ... ouchscreen and https://thepihut.com/products/adafruit- ......
View ArticleTroubleshooting • Re: WS2812B led control with Raspberry Pi 5 not working
I really like your straight forward approach, vanshksingh!Is it possible, to use it with RGBW LEDs?Statistics: Posted by Oh!Lee — Thu Apr 03, 2025 2:54 pm
View ArticleTroubleshooting • Re: Apologize in advance
https://github.com/raspberrypilearning/astro-pi-guidehttps://sense-hat.readthedocs.io/en/latest/Statistics: Posted by craigevil — Thu Apr 03, 2025 5:30 pm
View ArticleTroubleshooting • Re: segmentation fault
thanks for that info. after some research I was able to utilize homebrew ‘e2fsprogs’ which enabled the ability to run the command from my mac terminal:$ sudo e2fsck -f -y /dev/disk4s2e2fsck 1.47.2...
View ArticleTroubleshooting • h265 hardware acceleration is broken
After updating my Pi 5 yesterday, I now no longer seem to have h265 hardware acceleration. Running drm_info -j | jq 'with_entries(.value |= .driver.desc)' says it failed to retrieve information from...
View ArticleTroubleshooting • Re: Raspberry 4 not booting
This problem occurs if there is a problem with the SD card. Either it is not connected properly to the Pi or the installed OS is corrupted. https://forum.argon40.com/t/failed-to-o ......
View ArticleTroubleshooting • Re: Can't remote in using laptop to Raspberry pi
Suppose, if I connect the TV monitor to the Raspberry PI. Then I power up the Raspberry Pi with the official Raspberry Pi power supply and power up the TV from the AC outlet. What should I expect now?...
View ArticleTroubleshooting • Re: Replacement DA9091 PMIC
The datasheet we have on the DA9091 is under NDA so cannot be released. That's where legislation would help because it would eliminate that situation.The legislation would require the manufacturer of...
View ArticleTroubleshooting • Re: rpi5 no longer booting after power outage
i confirmed that the vmlinuz and initrd files in /boot (ext4) matched the ones in /boot/firmware (fat32)its highly unlikely that any corruption would hit both copies of the file in the same...
View ArticleTroubleshooting • Re: HM-10 does not talk to raspi 5
AT+RENEW restores the default factory settings which is Peripheral/No security. I get a reply OK+RENEW. When sending, the HM10 must not be connected, 9600 baud, no LF or CR line termination. One way...
View ArticleTroubleshooting • Waveshare 2.8" tft
Anyone got one of these to work with Bookworm?https://thepihut.com/products/spi-2-8-3 ... zLEALw_wcBI tried... dtoverlay=pitft28-resistive,rotate=270,speed=64000000,fps=30,drmBut no luck .Statistics:...
View ArticleClik here to view.
Troubleshooting • Re: Waveshare 2.8" tft
I'm not sure I have the same unit but I have a couple Waveshare TFT displays. I had no end of trouble getting them to work on Bookworm. I finally ended up with:dtoverlay=piscreen,drmand that's it. X11...
View ArticleTroubleshooting • Re: h265 hardware acceleration is broken
There was an update to ffmpeg on RPiOS bookworm that was needed for hevc decode to work with the 6.12 kernel.If an application uses system ffmpeg then I'd expect it to continue to work.However if it...
View Article