Troubleshooting • Raspberry Pi 2W will not turn on.
My Order number 3W342878N20808123 raspberry pi 2W is not turning on. I just got it not to long ago, I never used it until after thanksgiving due to being busy, once I got it open to load up for DAK...
View ArticleTroubleshooting • Raspberry PI 4B 2018 not working
Hey everyone, I need some help.I am a beginner at this and just started working with a raspberry pi. I am trying to make a home assistant, it booted and started to kinda work. But now my Raspberry...
View ArticleTroubleshooting • Re: Raspberry Pi 2W will not turn on.
viewtopic.php?t=58151Follow the suggestions in the above thread, and post results.Statistics: Posted by wildfire — Sun Dec 15, 2024 6:31 pm
View ArticleTroubleshooting • ALLM activation ? (Automatic Low Latency Mode) on PI5
Hello all, I have a PI5, connected to a TV projector. My issues lies with the mouse pointer being verry laggy. My projector has a so called ALLM (Automatic Low Latency Mode) which is supposed to be...
View ArticleTroubleshooting • Pi 500 HDMI works in firmware, but not in Linux
I've been unable to get my Pi 500 working with any of my HDMI displays.The displays I've tried are:- LG 27UP600-W (2160p monitor)- LG OLED48B4 (2160p TV)- Dell P2416Db (1440p monitor)For all of these...
View ArticleTroubleshooting • How to rotate touchscreen when xinput command not found
Hello,I am running a Raspberry Pi 4 with Raspberry Pi OS LITE (64-BIT) setup in kiosk mode to display Home Assistant in Chromium.I have been able to rotate boot up screen by adding Code:...
View ArticleTroubleshooting • Re: Raspberry PI 4B 2018 not working
you need to provide more info.- what power supply ? (highly recommend the official)- what PI-OS did you load?- what else did you load? (you mentioned home assistant?)Just FYI: updating the bootloader...
View ArticleTroubleshooting • Re: gpio-shutdown is successfully halting Pi, but not...
The Pi 5 has a power button. Also, if you are good at soldering, there are two holes between the USB C connector and the first micro HDMI connector which are for you to add your own power button. Much...
View ArticleTroubleshooting • Re: Raspberry Pi 5 5V/5A power issues, and possible solution
IIRC, the USB spec doesn't allow currents above 5A, so this bit of the spec is nonsense. However, the 5V15 5A mode is what the Pi5 requires when well loaded.Yeah, that's interesting, isn't it?I've...
View ArticleTroubleshooting • Re: Zero 2w sudden connection problem
I have a problem connecting the microcontroller to my laptop over the network using the putty application.To start right at the beginning. An RPiZero2W is not a microcontroller.Ref: Raspberry Pi...
View ArticleTroubleshooting • Re: RPI 5 not booting after update
Im having same issue, I perform and update then upgrade and after the restart it is not coming backStatistics: Posted by luisfco667 — Mon Dec 16, 2024 7:21 pm
View ArticleTroubleshooting • Upgrading from 3B+ to 4 or 5
My loyal 3B+ has (probably) passed away, presumably from old age and constant use--it's my dhcp and dns server. I'm currently trying the "leave it alone and unplugged for 24 hours and, in the interim,...
View ArticleTroubleshooting • Re: Upgrading from 3B+ to 4 or 5
Start with a fresh OS installation on Pi5.Statistics: Posted by aBUGSworstnightmare — Mon Dec 16, 2024 7:54 pm
View ArticleTroubleshooting • Re: TF card can't been recognized as SDR104
Thanks for quick relpy.TF or microSD,no matter what name it is called,how can I do ?Statistics: Posted by solaris33 — Mon Dec 16, 2024 7:57 pm
View ArticleTroubleshooting • Re: Stremio install
Hi all. I've installed stremio on my m.2 ssd via pcie in pineberry HatDrive! Bottom in my RPI5 using RPi imager, and before booting, Stremio OS switch between different video resolution (hdmi pluged...
View ArticleTroubleshooting • Windows Imager fails as Windows keeps asking to format...
I'm trying to use the Imager on Windows 10 onto an SD card.Background: I have an old Pi 1B and before I get a newer one, I wanted to play around with the old one, bringing it up to date -- it has sat...
View ArticleTroubleshooting • Re: Power not capable supplying 5A w/Sound Level sensor?
might be old, but:https://learn.adafruit.com/scanning-i2c ... spberry-piIndeed, I did perform this step and the output shows only dashes. I did enable I2C beforehand.Statistics: Posted by EmptyCasket...
View ArticleTroubleshooting • Re: Windows Imager fails as Windows keeps asking to format...
1)win$ cannot deal with EXT4 partitions. So, yes, it will always ask. You can say no or yes, as the PI-imager will overwrite it anyway.if it makes your life easier, you can say yes, and (i'm pretty...
View ArticleTroubleshooting • Re: ABC (Aus) IVIEW DRM error RP5 with latest RPOS
+1Statistics: Posted by tony-allan — Mon Dec 16, 2024 9:56 pm
View ArticleTroubleshooting • Re: Network mount not surviving reboot
You have noauto and x-systemd.automount in your mount options. I wouldn't expect systemd to attempt mounting it until you first try to access a file or directory below the mount point.You also have...
View Article