Troubleshooting • Re: NVME Not Recognised, Pi freezing on bootup
Have you tried asking GeeekPi for support with their product?Statistics: Posted by thagrol — Tue Nov 19, 2024 1:49 pm
View ArticleClik here to view.
Troubleshooting • Yet another non-boot RPi 5 - solid red light
Hello,I recently purchased a Raspberry Pi 5 and OEM heat sink as well as a Canakit 45w power supply with switch because the only power supply I had was only rated at 3amps and had no switch (I hate...
View ArticleTroubleshooting • Re: How to safely save video when power off occur?
I am currently saving the video and rebooting Pi every 1 hour... Only downside is that if there is a poweroff then Video is not saved.!Statistics: Posted by ujjwalrathod007 — Tue Nov 19, 2024 2:51 pm
View ArticleTroubleshooting • Re: Yet another non-boot RPi 5 - solid red light
What does the HDMI monitor show (if anything) when you power it on without any microSD card in the Pi5 (and no USB SSD attached)Statistics: Posted by neilgl — Tue Nov 19, 2024 3:24 pm
View ArticleTroubleshooting • Re: Major WiFi problems with latest RasPiOS 64 release...
I hope that it goes without saying that defaulting WiFi to "Off" in new system images, with no way of turning it on without either connecting a keyboard and monitor or connecting an ethernet cable is...
View ArticleTroubleshooting • Monitor shows "NOT SUPPORT!"
I got a new Raspberry Pi 5 Kit. After I put it all together and plugged it in, my screen comes up with either "No Signal" or "Not Support!". What's my problem? This is the same monitor I used with my...
View ArticleTroubleshooting • Re: Raspberry PI 5 LAN stop. Coonection wired.
Which OS are you using? - Raspberry Pi OS "Bookworm" or something else?Is your router allocating ip addresses via DHCP? and what does the router show when one Pi is connected to that...
View ArticleTroubleshooting • Re: Monitor shows "NOT SUPPORT!"
I got a new Raspberry Pi 5 Kit. After I put it all together and plugged it in, my screen comes up with either "No Signal" or "Not Support!". What's my problem? This is the same monitor I used with my...
View ArticleTroubleshooting • Re: Raspberry Pi W 2 runs fine for 4-5 hours then freezes
Surprised your CPU hits 50% reading serial data.Post your code.Statistics: Posted by rpiMike — Wed Nov 20, 2024 10:13 am
View ArticleTroubleshooting • Re: BCM2711 change UART clock
When I search for BCM2835_CLOCK_UART I just found a reference in /dt-bindings/clock/bcm2835.h but the clock is not set here.So if anyone could point me in the right direction, that would be highly...
View ArticleTroubleshooting • Re: Connection Refused Error
Pi5 implies Bookworm. Bookworm implies Network Manager. Unless things have changed in the last week or so NM doesn't like DHCPless networks and won't bring up the interface on the Pi.With you on...
View ArticleClik here to view.
Troubleshooting • Language problems
I have a question about the language settings. I live in Portugal but speak Dutch and English.I wanted to set the Rasp Pi to English language. However, now I get parts in Portuguese and parts in...
View ArticleTroubleshooting • Re: Raspberry Pi 5 WiFi Issues
The issue is still present, any more ideas anyone?I tried changing the channel, switching WiFi band, but nothing.It still randomly disconnects from WiFi.Statistics: Posted by Nevals — Wed Nov 20, 2024...
View ArticleTroubleshooting • Re: Wayland: Desktop - Mouse "Drag & Drop" on...
Pi OS updates (several at the same time) that arrived on Nov, 20, 2024 cured the problem. I don't know which particular up date fixed it, but everything is back to normalStatistics: Posted by a330mech...
View ArticleTroubleshooting • Low voltage warning at 1.5V
I got many low voltage warning on a Raspi 3B, and checked with: vcgencmd measure_volts, so it show 1.5V. This make no sense the RASPI SEEM TO WORK FINE ....I change the power supply to another 5V...
View ArticleTroubleshooting • Re: Pi4 Weird color when dtoverlay=vc4-kms-v3d enabled for...
You're running on Bullseye, when the standard install is now Bookworm (and has been for a year).dtoverlay=vc4-fkms-v3d is not the default, and we're using dtoverlay=vc4-kms-v3d. Are you totally...
View ArticleTroubleshooting • Re: Overscan on DSI port.
Overscan isn't a thing on DSI devices.If you want to render to part of the display, then use the DRM/KMS APIs to render to your desired destination rectangle.Statistics: Posted by 6by9 — Wed Nov 20,...
View ArticleTroubleshooting • Re: Pi5 hanging when transfering large files to NAS
I will say it again, you need to contact synology, I doubt if anyone here can help you and you will not get any help from the samba mailing list, the synology changes are so large,Is it possible for a...
View ArticleTroubleshooting • Gadget mode on raspberry pi zero 2w bookworm 12 64 bit lite
I have tried many tutorials online with no success on getting my raspberry pi 2w in gadget ethernet mode. I would like to connect my android tablet via usb cabled, so I can ssh from my tablet into my...
View ArticleTroubleshooting • Re: System not seeing M2 HAT and/or 256 card
Yes I see what I did there. It's the official HAT, but not card. I have no idea what I did when I ordered it from Amazon. I'm sure I searched for pci nvme SSDs.But no, if I do decide to carry on then...
View Article