Troubleshooting • Re: rpicam problem with two identical cameras
What does rpicam-vid --list-cameras show ?Statistics: Posted by gordon77 — Mon Aug 19, 2024 6:39 pm
View ArticleTroubleshooting • Raspberry PI 5 green light
Hello, I also have a problem with raspberry , I wanted to change the paste on the processor and add a new cooler, after I mounted the cooler, it no longer displays anything on the screen what did i do...
View ArticleTroubleshooting • [BUG]Bookwoorm: Pi2 No UART possible on GPIO14/15
Hello Pi Friends,with the latest bookworm version (2024-07-04) on my Raspberry Pi 2 Model B, I did not get the UART to work on the GPIOs 14/15.I want to use the UART to log some microcontrollers.But...
View ArticleTroubleshooting • Re: Rpi5 - Solid red light, no booting
I am also experiencing this, I guess the conclusion is that the device is defective? It sort of worked for some months, but now it is only showing a solid red light. Pressing the power-button does...
View ArticleTroubleshooting • Re: [BUG]Bookwoorm: Pi2 No UART possible on GPIO14/15
How are you using the uart on GPIO14/15? e.g. /dev/ttyAMA0 or something else?[Pi2 Bookworm (32-bit) Lite]What do you get from pinctrl?Code: pi@pi:~ $ pinctrl get 14,1514: a0 -- | hi // GPIO14 =...
View ArticleTroubleshooting • Re: Cannot find Thonny workbench.py
On my Pi5 Bookworm it is in/usr/lib/python3/dist-packages/thonny/workbench.pyStatistics: Posted by neilgl — Mon Aug 19, 2024 9:07 pm
View ArticleTroubleshooting • Re: Pi 5 Bookworm NTFS does not work
HiI felt exactly into the same issue with an external SSD drive formatted with NTFS that couldn't mount on my rpbi5. Thanks for the hint.Have 2 questions:- now the drive is mounted read-only. Is it...
View ArticleTroubleshooting • Pi5 temp variation?
I have 2 identical Pi5 setups with the same case, and software load. One is running 5 degrees C hotter on CPU and 10 degrees hotter on composite. If anything the load is slighter lower on the one...
View ArticleTroubleshooting • Re: Pi5 temp variation?
probably the thermal pads, give them some time to heat up/break in.60 is the norm, below 80 it's all good.Statistics: Posted by kerry_s — Mon Aug 19, 2024 9:56 pm
View ArticleClik here to view.
Troubleshooting • Re: RPI-Clone & Bookworm
2. Manual mount accomplished and "/mnt/clone/boot/firmware" is empty and SD card will not bootEverything is OK. /boot/firmware is empty because /dev /mmcblk0p1(the boot partition) will be mounted at...
View ArticleTroubleshooting • Re: Pi 4 reboots over night
What are you running on it and is there a power (glitch) off/on every night?Statistics: Posted by neilgl — Tue Aug 20, 2024 7:28 pm
View ArticleTroubleshooting • Re: SD card boots on one Pi, but not another
As thagrol said, it'll be the firmware revision on your OS. You need to update it Updating Firmware using the second set of instructions for Updating just the Firmware.Statistics: Posted by rpdom —...
View ArticleTroubleshooting • Re: pi5 stopped seeing nvme
Thanks for the ideas, but Yes i have checked the cable. Have tried all possible ways to connect it. I have power but that's it. Waveshare support is pointless. They keep asking me to send them video...
View ArticleTroubleshooting • Re: CVLC working from CMD but not from PHP
Maybe try a simple example that plays one .wav file (Rammstein) links234.wav using aplay. Audio is set to AV Jack. No monitor attached to HDMI.This works on my Pi4 running Bookworm 64-bit with apache2...
View ArticleTroubleshooting • Raspberry pi 3 with 5 inch screen MPI5008
Hello! some time ago i got a 5 inch chinese screen for a proyect that never got to live tbh.The thing is, i got a new proyect at hand and wanted to use the screen with the touch capabilities that it...
View ArticleTroubleshooting • Pi4 doesn't connect to wifi after reboot
I have a Pi4 that has been connected to my wifi network for a while without any problems. Then I needed to update its OS from Debian 10 (Buster) to Debian 11 (Bullseye), so I followed the steps to...
View ArticleTroubleshooting • Re: No Supported Network Connection Manager Found
Gotcha thank you for the suggestions! I figured I'd probably end up wiping the SD and starting again, but I've been running a server via OpenMediaVault on it I really hate to have to set up again. Any...
View ArticleTroubleshooting • Re: How to set RGB full (0-255) on Pi 5?
Where are you seeing the RGB not at full 8 bits (0-255) per channel?If it is the frame buffer, then yes this is RGB565 (16 bit)From viewtopic.php?p=2223165#p2223165The /dev/fb0 that you see is the...
View ArticleTroubleshooting • Re: Pi4 doesn't connect to wifi after reboot
To fix WIFI try removing conman.Code: sudo apt remove conmanStatistics: Posted by klricks — Tue Aug 20, 2024 10:00 pm
View ArticleClik here to view.
Troubleshooting • Connected thermal printer keeps changing URI
I have a weird issue where the receipt printer connected to the pi keeps "losing connection" if the pi is rebooted, and what I've noticed is that when that happens, and then I try to add a new...
View Article