Troubleshooting • Re: No sound on Raspberry PI 3 B+
I did switch it to HDMI, even restarted it after, but still no sound.I did not realize my OS was legacy. I went by the Image tool's recommendations on the website. I'm going to reflash the newer OS,...
View ArticleTroubleshooting • Can't update: "raspberrypi-kernel-headers package is...
Hi there,I have a RPi4 which sits doing its thing all year around with little interaction from me.Today I wanted to update nodeJS from v12 to the latest, but I kept getting an error I couldn't solve,...
View ArticleTroubleshooting • Re: Beepy JDI Display
do the official Getting Started instructions not work on your hardware?Statistics: Posted by scruss — Mon Jun 10, 2024 8:49 pm
View ArticleTroubleshooting • Re: RPi5 - External USB drive not working and clicking.
Does you 25W PSU have a 5V/5A mode that can be negotiated via USB PD?If not, current available to conected USB devices will be restricted to a combined maximum of 600mA which probably won't be enough...
View ArticleTroubleshooting • Re: QJoyPad closing when mapped button is pressed
QJoyPad appears to have compatibility issues with the Raspberry Pi Operating System:qjoypad tray icon closes when I press a button on the controller #57 panzi/qjoypad -...
View ArticleTroubleshooting • Remote Desktop Connection or VNC to bookworm
I'm trying to connect with a remote desktop to a Pi 4 with bookworm.I saw this locked thread From a Windows Client, I am able to SSH into the Pi with Putty.I have disabled Wayland (per notes from...
View ArticleTroubleshooting • Re: Can't update: "raspberrypi-kernel-headers package...
I have even tried apt-get install --reinstall raspberrypi-bootloader raspberrypi-kernel and even that fails with the same error:Errors were encountered while processing: raspberrypi-kernel-headersE:...
View ArticleTroubleshooting • Re: Remote Desktop Connection or VNC to bookworm
I'm trying to connect with a remote desktop to a Pi 4 with bookworm.I saw this locked thread From a Windows Client, I am able to SSH into the Pi with Putty.I have disabled Wayland (per notes from...
View ArticleTroubleshooting • Re: how to get rid of false trigger using edge detection
Hello and thank you very much for the replies!All switch wires were disconnected from the pcb, only the ribbon cable from the raspberry to the pcb remained connected, it's a 20 cm ribbon cable, yet...
View ArticleTroubleshooting • One usb 3.0 port works, while the second usb 3.0 port does not
Hello everyone,I am having an issue with one of the USB 3.0 ports on my Pi5. The lower USB 3.0 port does not recognize peripherals like: a USB 3.0 flash drive (Memorex), a USB 3.0 hub (Inland), or an...
View ArticleClik here to view.
Troubleshooting • Re: Raspberry Pi 4B red indicator light from on to...
Is anything on the board getting hot to the touch?I didn't feel any noticeable overheating issues. After the red LED goes off for a bit, it comes back on (without any power cut), and that's when the...
View ArticleTroubleshooting • Re: One usb 3.0 port works, while the second usb 3.0 port...
Hello everyone,I am having an issue with one of the USB 3.0 ports on my Pi5. The lower USB 3.0 port does not recognize peripherals like: a USB 3.0 flash drive (Memorex), a USB 3.0 hub (Inland), or an...
View ArticleTroubleshooting • Re: Sending 3.3V from one RPi to a second RPi's GPIO stops...
Thanks so much. I hadn't even considered that the HDMI ports would be doing that. I just saw that it worked when testing with monitors, and didn't think about the fact that the circuit made no sense...
View ArticleTroubleshooting • Re: Headless RPi 3B+ extremely slow !
You may be having a "thrashing" problem which occurs when the system runs out of real memory and begins heavily use the swap space. If swap space runs out, then the system begins to crawl along even...
View ArticleClik here to view.
Troubleshooting • RPi4B broken after DISPLAY connected inversly
Hi there!I connected accidentally screen to DISPLAY port inversly, then there is only solid red LED. I also notice some signs of overheating on 3.3v coil (marked by red on the picture).There were no...
View ArticleTroubleshooting • Re: Impossible to get rid of under voltage errors (3B)
Are there any actual problems - other than the lightning bolt? I.e., is it just the warning that is concerning you?I ask because I've basically grown to live with it. I have "official power supplies"...
View ArticleTroubleshooting • Re: Pi 5 got a couple of parts knocked off.
my educated guess is that the top two are ferrite beads, and the smaller lower on is a decoupling cap of say 10nF.Statistics: Posted by mahjongg — Thu Jun 13, 2024 3:14 am
View ArticleTroubleshooting • Raspberry PI 4 - rebooting and unreachable
Hi Folks,I'm hoping for some help with my PI! I purchased and installed a PI 4 (8gb) in Oct 2022, I followed a couple of youtube videos on setup, which for me was hosting a Plex media server, and a...
View ArticleTroubleshooting • Help !! Unable to read Partition as FAT issue !!
Hello everyoneI am using Raspberry Pi 4b and today I encountered an issue when booting.During first boot or power on Pi boots fine but after each reboot it says Unable to read partition as...
View ArticleTroubleshooting • Re: Pi 4 wifi works for a few days then I have to reinstall OS
Morning, I have scanned through the log and it's mostly from the day of the reboot (yesterday) and a few entries from the day before that (the 11th).I have (I think) saved this log in a .txt file with...
View Article