Troubleshooting • Re: vcgencmd display power 0 doesn't work more relevant in...
the wayland command works perfectly. this is step 1.alot of people are facing the 'after turning off, it auto turns back on after a couple of seconds'.this is step 2, where you will need to add...
View ArticleTroubleshooting • Re: Problems using display with raspberry pi
fbcp is dead as it relies on the legacy (DispmanX) display stack.There are tinydrm drivers for your panel that create an ILI9341 display as a normal DRM display. It then depends on whether your...
View ArticleClik here to view.
Troubleshooting • USB to SATA cable dies on reboot of RPi
Hi Folks,I'm running my RPI3b with an SSD connected.For the second time now, it seems that after a reboot, my USB-SATA cable has died.A simple 'sudo reboot' in a terminal that is.I am powering my Pi...
View ArticleTroubleshooting • Re: Pi 5 NVMe Boot Issue
How to know if the drive is incompatible?I'm unsure. I'm just aware that some M.2/NVMe adapter manufacturers have published lists of such drives.Maybe test the same Pi and M.2/NVMe adapter with a...
View ArticleTroubleshooting • Wayvnc no longer working at boot
I've just applied all updates today to my Pi5, after not using it for a couple of weeks. Wayvnc no longer starts at boot. If I go to Raspberry Pi configuration > interfaces the radio button for VNC...
View ArticleTroubleshooting • Re: Can't get a display image using the HDMI
The docs say:If 'M' is specified in the mode_option argument (after <yres> and before <bpp> and <refresh>, if specified) the timings will be calculated using VESA(TM) Coordinated...
View ArticleTroubleshooting • Re: Keyboard issues
Please check your power supply. Measure the voltage and current of the power source.Statistics: Posted by embeddedbarsha — Wed Jan 24, 2024 1:11 pm
View ArticleTroubleshooting • Re: Solid Red LED on running a Python script
If the red light on your Raspberry Pi is continuous, it indicates that your device is getting enough power to power on safely and should be performing correctly. However, if this light is blinking, it...
View ArticleClik here to view.
Troubleshooting • Re: Setting up NTP fails on bookworm
Thx guys, got it!Code: sudo apt install systemd-timesyncdCode: sudo nano /etc/systemd/timesyncd.conf[Time]NTP=FallbackNTP=0.nl.pool.ntp.org 1.nl.pool.ntp.org 2.nl.pool.ntp.org 3.nl.pool.ntp.orgCode:...
View ArticleTroubleshooting • Crontab reboot Pi 4 - odd behaviour
Hi All,i'm using a Pi 4 with a PiSDR image (for more details see https://github.com/luigifcruz/pisdr-image ). I'm running some code to collect data from an attached SDR. The code runs fine and...
View ArticleTroubleshooting • Re: Crontab reboot Pi 4 - odd behaviour
The code runs fine and collects what I need, but i've been experiencing a connection drop out to the SDR after several days (this is a long term project and i'm hoping to run this semi-permanently). I...
View ArticleTroubleshooting • Build HAT script not loading on/after startup
Hi, I have a Raspberry Pi 4 with the Build HATI have gone through https://github.com/thagrol/Guides/tree/main and attempted multiple methods to load my script. I have tried at startup, after startup...
View ArticleTroubleshooting • Re: Build HAT script not loading on/after startup
My latest command was Code: @reboot sleep 60; python3 /home/admin/Spike/ForceSensor.py &If you need that sleep an @reboot cron job is the wrong method. Work out why you need the sleep and use a...
View ArticleTroubleshooting • Re: Power down on a Raspberry Pi
From a default install of Bookworm...The only line in /etc/systemd/loingd.conf that is NOT commended outCode: HandlePowerKey=ignoreCan't cat /dev/input/event0Related to this other thread of yours, no?...
View ArticleTroubleshooting • Bookworm, Point to Point Ethernet (inc g_ether)
There have a been a few reports that point to point ethernet links no longer come up on Bookworm. I've posted some workarounds but so far those have all required either a way to login to the Pi via...
View ArticleTroubleshooting • Re: hplip icon not showing on taskbar
Thanks. Which script would that be?Statistics: Posted by GavinW — Thu Jan 25, 2024 3:18 pm
View ArticleTroubleshooting • Re: Unable to make my 'eth0' connection autoconnect on startup
I have tried everything I can think of to understand why the Pi refuses to use the connection I'm managing, but I can't find anything.I tried grep:ing for the new connection UUID that is created after...
View ArticleTroubleshooting • Re: Pi 4Bas OTG USB g_mass_storage not working where am I...
There's a lot wrong with that guide and a lot missing from it especially when it come to the limitations of the mass storage gadget. Try mine instead: USB Mass Storage Gadget - A Beginner's GuideAs...
View ArticleTroubleshooting • Re: Can't find the ip address of my Pi
I've just got a Pi5 and flashed CompanionPi to it to use it with a Streamdeck. Problem is, I can't find the ip address of the Pi.[ ... ]Any help is appreciated!A new day.A fresh read of your problem...
View ArticleTroubleshooting • RPi5 USB3.0 troubles when using hard drive dock
Hello,I am seeking help for a weird problem I came accross on RPI5. I have a hard drive dock: https://www.amazon.fr/Inateck-Station-d ... JSR8B?th=1On RPI4 I have absolutely no problems using it on...
View Article