Troubleshooting • YouTuBuddy - "Youtube-dl Not Running"
Hi all, hoping someone can help please?I have a Pi 400 with Raspian Bookworm installed and via Pi-Apps, ive installed YouTuBuddy. Installed fine, but when I search for a video, it times out and says...
View ArticleTroubleshooting • Re: CM5 not booting OpenWRT when RPI5 does
I tested booting the system with Raspberry OS lite and both ethernet interfaces were recognized. An IP was affected and I managed to sudo apt update and sudo apt upgrade, with WiFi disabled to ensure...
View ArticleTroubleshooting • Re: Stuck during upgrade
so this is interesting. I'm using a Pi 4 and have do a fresh flash of my SD card with OS 64 bit version. I did the usual, sudo apt-get update & sudo apt-get upgrade and starting everything up and...
View ArticleTroubleshooting • Camera module 3 issues
Hello, I want to do a few tests with my camera module 3, with a raspberrypi zero 2W. But when I enter the command : cameralib-hello, the screening window is black and I get the error : "device timeout...
View ArticleTroubleshooting • Firstrun.sh not generated
Hi,I've been working on some first-boot scripts for the past two weeks and they depend on the firstrun.sh shell script in the boot directory. It has been all good until today and all my stuff works,...
View ArticleClik here to view.
Troubleshooting • I cannot get a remote VNC setup working Raspberry Pi5
VNC REMOTE SERVER ISSUES Hello Raspberry Pi users, I recently purchased a Raspberry Pi 5 and have had no end of troubles trying to get a VCN server to work with it. I have tried RealVNC. The RealVNC...
View ArticleTroubleshooting • Re: Zebra printer issues
Try installing the cups-bsd package with apt. That should give you the lpr command.This was the answer! Thank you so much!Statistics: Posted by bklass — Wed Mar 26, 2025 12:49 pm
View ArticleTroubleshooting • Re: Camera module 3 issues
Have you looked at the documentation? viewtopic.php?t=362707Statistics: Posted by nigelbartlett1 — Wed Mar 26, 2025 1:04 pm
View ArticleTroubleshooting • Re: I cannot get a remote VNC setup working Raspberry Pi5
Maybe start from a clean installation of Bookworm 64-bit on the Pi5 and enable VNC server.Then check that Real VNC Viewer on a PC can connect OK - it does for me, with no issues.For remote (internet)...
View ArticleTroubleshooting • Re: Cannot run a script at startup...
Which model of Pi is it running on (e.g. Pi5 with 4GB RAM)Is that Pi running Raspberry Pi OS 64-bit "Bookworm" with desktop or something else?The guide to all things startup (thanks thagrol) is here:...
View ArticleClik here to view.
Troubleshooting • Pi5 + active cool + tv hat
HelloI just received my pi5 whit the tvhat to make a tvheadend box.I was putting togheter everything and i noticed a problem, the hat don't make proper contact on the gpio extension becouse of 2...
View ArticleTroubleshooting • Re: Raspberry Pi is dying all the time
I wouldn't. That could/will pull in a lot more than just the kernel and related modules.Too late. After the update the issue became worse. Now the system is only some minutes available before dying.It...
View ArticleTroubleshooting • ReSpeaker Not Working with Raspberry Pi Kernel – Downgrade...
I am using a Raspberry Pi 4 and ReSpeaker 2-Mic Array v2.0, but the current kernel version (6.12.19-v8+) is incompatible with ReSpeaker. I tried downgrading the kernel to version 6.6.74, as suggested,...
View ArticleTroubleshooting • Re: Creating a WiFi hotspot
" That is what I did, is it not?" - not if the link to raspberrytips was the one used.Anyway, for command line we use nmcli or nmtuiStatistics: Posted by neilgl — Thu Mar 27, 2025 10:10 am
View ArticleTroubleshooting • Re: raspPi 4B i2c cannot detect address
Code: sda.1 --- | |---| |-------| |--------- |__| |__| |___|0V here ---------------------------------------------To add ASCII art include it in [code][/code] tags, That way the forum can't destroy...
View ArticleTroubleshooting • Re: Raspberry pi RED Led blinking continuously when power on
1) what kind of PI? (pi3/4/5/400/500)?2) if you remove the HATs and USB, does the issue go away?Statistics: Posted by terribleted — Thu Mar 27, 2025 12:16 pm
View ArticleTroubleshooting • Issue with ports or me?
I have 3 Raspberry Pi Pico 2's and all three of them won't light up on their LED. I have 2 from one distributer and 1 from another, I've used 3 different USB to micro in order to try and burn firmware...
View ArticleTroubleshooting • Re: Issue with ports or me?
Regarding “… they do not retain it when they are unplugged…”Do you drag and drop the firmware to the pico or use Thonny on a PC?Statistics: Posted by neilgl — Thu Mar 27, 2025 3:17 pm
View ArticleTroubleshooting • Usb boot not working when ssd is connected to a different...
So, I have two power sources (two phone chargers, different brand, 5V-3.1A). Im using a raspberry pi 4B, and it's in boot from usb mode. The ssd connected to the pi is powered externally. If I power...
View ArticleClik here to view.
Troubleshooting • Re: Usb boot not working when ssd is connected to a...
As always with these types of questions, chargers aren't a PSU, buy the recommended PSU & all your problems will likely just vanish... (Official PSU aren't expensive, but can save you a lot of...
View Article