Troubleshooting • Re: Raspberry Pi 5 not working
are you using an adapter for the HDMI, or the proper cable?- i ask because the diagnostic display isn't appearing. either your HDMI cabling is suspect, or i think it's dead(since you already updated...
View ArticleTroubleshooting • Re: Error after update / upgrade fresh install PI 4
It seems that my SD card is the problem, i am trying another one and everything is fine.Statistics: Posted by Jacques-Olivier — Thu Jan 30, 2025 5:07 pm
View ArticleTroubleshooting • Re: tvservice is not supported when using the vc4-kms-v3d...
I have same problem as topic starter, same text accrue when I boot r-pi 4 with pinn (pinn is empty, no os installed, first launch). And I can’t do anything with it, because there is onli this texts on...
View ArticleTroubleshooting • Re: Zero 2 W will only boot Bullseye, not Bookworm
My Zero 2 W (purchased about a year ago) has been working with RPi OS Lite 32-bit Bullseye (now labeled "legacy" in RPi Imager). However it doesn't have a package I need (imx500) so I'm trying to...
View ArticleTroubleshooting • Re: Starting Chromium at login
Try this:Look for chromium .desktop file in /usr/share/applicationsCopy that .desktop file to the folder ~/.config/autostart (create that folder if it doesn't exists and check that the user owns...
View ArticleTroubleshooting • Re: 2000 posts on problems with Pi, ssh & putty still...
The pictures are two relatively small screen grabs, saved as GIFs. Trying again saved as JPGs..PiLoginFailure2.jpgHave you googled the error message? Have you tried some of the suggested fixes? For...
View ArticleTroubleshooting • [SOLVED] Starting Chromium at login
Great !It works !Thank you very much Fprietog.Statistics: Posted by genetin — Fri Jan 31, 2025 11:47 pm
View ArticleTroubleshooting • Re: Audio on rpi
I need to make a configurations for I2S Input that work as a slave I have connected two RPI 3B+ together through the I2S, one work as Master I2S that generate a signal source and the other one work as...
View ArticleTroubleshooting • Weird issue with ssh? OpenSSL? Something else?
For ages I've had a Pi5 (and Pi 4 before that) running a test web server, which is running PiOS Bookworm lite.Because I've been playing around with Post Quantum Cryptography for the server I had to...
View ArticleTroubleshooting • Trying to build an NTP server using GNSS hat on piZero:...
Hi, Im using Pi Zero v1.1 and waveshare GNSS Hat.I wanted to create an NTP server through Chrony, that pulls time from GPS/GNSS and this server to act as a central time provider to local other systems...
View ArticleTroubleshooting • Re: RPI5 updating bootloader via SD issues (got files back,...
Glad you made it!For some reason this SD is a read onlyThe Sandisk cards are known for became read-only when it detects that is near to a total fail. At least you can read it.is there a way to get my...
View ArticleTroubleshooting • Re: new pi5 broken, only gives one long flash in attempt to...
well, some charger DO work. but usually cause problems.... the recommended charger is Cheap ($12?) and eliminates that issue.Statistics: Posted by terribleted — Sat Feb 01, 2025 9:24 pm
View ArticleClik here to view.
Troubleshooting • Re: Pi 400 dosen't boot after full-upgrade, Solide green...
1) when you used a spare card, i assume you loaded bookworm....2) if you remove the SD card, and power up, you should get the diagnostic display. Do you?pay attention to the "display" line... does it...
View ArticleTroubleshooting • CM4 Unable to Flash
I can't flash or interact with a CM4 I recently purchased. The activity light is flashing green rapidly and constantly, there is no pattern to the flashing. The device is not showing up on the PC. I...
View ArticleTroubleshooting • Re: Old 3B having trouble updating and login
I don’t have any files on it so don’t know why there isn’t room or why it’s giving errors I ran the startlxde-piGot this message Gtk-warning **: cannot open display:Any idea what to do now?Edit: I...
View ArticleTroubleshooting • PI 4 - gpio no more working after input pull-up
I have raspbian 64bit.I wanted to use the gpio as an input pull-up and then as an output, but when I wanted to move the pin to a breadboard, the pins changed state and now I can't use them properly....
View ArticleTroubleshooting • How to move from CLI to Debian OS
So I was tweaking my pi after getting and found an option called “CLI” I didn’t think much of it, but turns out I had accidentally pressed it and sent me to what I now think is called the Command...
View ArticleTroubleshooting • Re: Act LED Wont turn on (pi4)
You tried pretty much everything. Check for hardware damage. See if any component looks burnt or gets burning hot.Statistics: Posted by ahsrabrifat — Sun Feb 02, 2025 5:16 am
View ArticleTroubleshooting • Re: How to move from CLI to Debian OS
So I was tweaking my pi after getting and found an option called “CLI” I didn’t think much of it, but turns out I had accidentally pressed it and sent me to what I now think is called the Command...
View ArticleTroubleshooting • Re: Fan keeps spinning at shutdown and pin 5 and 9...
Looks like you have i2C enabled. That will prevent use of GPIO3 (physical pin 5) for other purposes.Why do you say so ? Did you experienced the same or you suggest it looking at the info I shared...
View Article