Troubleshooting • Raspberry Pi 5 8GB wont boot from SD card
I'm having trouble booting my New Raspberry pi 5 from SD card. When I try to boot it from SD card, it gives this error. failed to open SD card "(CMD 810010 status 0)" It will boot from USB and works...
View ArticleTroubleshooting • Re: Raspberrypi 5 freeze randomly and verry often
It is more complicated:All my external drives use now only USB 2.0 speeds (about 40 MB/s), while they reached 300 MB/s prior. Perhaps my USB 3.0 ports got damaged. Now my sd card with about 90 MB/s is...
View ArticleTroubleshooting • Re: Going back to package provided kernels
I ended up doing a reinstall and reconfiguring from my backup, I think this specific Pi was originally running Buster Lite and then upgraded in place to Bullseye and then Bookworm so it was probably...
View ArticleTroubleshooting • RPI 5 Not accessing all USB flash drives.
I have a Raspberry Pi 5 with 8 Mb that wont access certain USB flash or external drives.I'm using the latest version of Raspberry PI OS, Bookworm with 6.6.20+rpt-rpi-2712Have tried both the desktop...
View ArticleTroubleshooting • Raspberry Pi Pico strange issue
I got a set of 4 Raspberry Pi Pico recently. I had no issues with 3 of them. Used the same USB cable, held the BOOTSEL button, dragged and dropped uf2 files, everything worked fine. This last one...
View ArticleTroubleshooting • Re: Rpi5 - Solid red light, no booting
If I were in Vegas, i'd put a small pile of chips on "it's dead".To confirm, carefully read and follow the instructions here viewtopic.php?t=58151Statistics: Posted by memjr — Fri Mar 29, 2024 2:19 am
View ArticleTroubleshooting • Re: Raspberry Pi 5 8GB wont boot from SD card
Troubleshooting 101: try a different SD card.Statistics: Posted by memjr — Fri Mar 29, 2024 2:20 am
View ArticleTroubleshooting • Re: No wifi or HDMI after soldering to gpio pins -...
Troubleshooting 101: if hooking things up made it behave this way, then disconnect everything and see if it still works.Power it down, disconnect everything, then connect a mouse, a keyboard and a...
View ArticleTroubleshooting • Re: WiFi not working, disappeared from status bar after apt...
Solution found within the Clockwork Discord community:Run sudo raspi-config and go to advanced, network and pick dhcpd then reboot and your wifi will be back.Statistics: Posted by WesSouza — Fri Mar...
View ArticleTroubleshooting • Re: shiny new pi 5
I can sympathise with the screen issues you are having. My issues started when I upgraded the media player Pi to Bullseye so I stayed with Buster which works perfectly out of the box except for my...
View ArticleTroubleshooting • Re: Raspberry Pi 5 Troubleshooting
When I look in the utilities section on the RPI imager I don't see anything but utilities to change the boot configuration. Am I missing something, is there somewhere else to look?The images that...
View ArticleTroubleshooting • Re: Help Needed: Short Circuit between 3.3V Pin and Ground...
Yes I did. But I couldn’t find anything where I can buy the DA9091. Or something can work for raspberry pi 5. Should U throw it away or what?Statistics: Posted by ghoussam94 — Sat Mar 30, 2024 1:38 am
View ArticleClik here to view.
Troubleshooting • Raspberry Pi 4 Won't Connect To Wifi No Matter What
My raspberry pi disconnect to wifi and never connect again even if it has correct configuration. I insert different Sdcard containing different os in raspberry pi but none of them connects to wifi...
View ArticleTroubleshooting • Re: Pi Zero 2 W - RaspiOS - No wireless after apt full-upgrade
2021-05-07-raspios-buster-armhf-full.zip2021-05-07-raspios-buster-armhf.ziphttps://downloads.raspberrypi.com/raspi ... 021-05-28/honestly i do not know if the wifi is fully working.it came up on first...
View ArticleTroubleshooting • wlan0 disabled even though I configured my wlan in Imager?
I just imaged latest raspbian for rpi4 and I can ssh in (with the user I configured in imager settings) over ethernet. However wlan0 reports down even thought I configured the wlan in imager. Is this...
View ArticleTroubleshooting • Re: Troubleshooting a Pi4B with no ethernet after upgrading...
In place; I'm proceeding a plan to replace it, but I have the old SD and would love a shot at recovering it.Statistics: Posted by surfrock66 — Sat Mar 30, 2024 5:09 am
View ArticleTroubleshooting • Re: V4L2 remote I/O error with IMX219 on RPi5
Thank you for the response.Before performing any operations, my version was 6.1.63. I tried to upgrade to 6.1.65 using rpi-update, but it still returns the same error.I also tried running sudo...
View ArticleTroubleshooting • Re: wlan0 disabled even though I configured my wlan in Imager?
default 1 active connection at a timeStatistics: Posted by kerry_s — Sat Mar 30, 2024 5:50 am
View ArticleTroubleshooting • Re: Raspberry Pi 4 Won't Connect To Wifi No Matter What
Regarding the Ethernet issue, I actually haven't tried connecting my Raspberry Pi to the internet using a LAN cable. I mention the Ethernet issue because when I attempt to link the Raspberry Pi to my...
View ArticleClik here to view.
Troubleshooting • Trouble shooting
On my pi 4 4GB both the green and red leds are on solid blink not flickering in the situations where SD card is inserted and unmounted. Changing the SD card didn't help either. Changing the Adapter...
View Article