Troubleshooting • Re: screenshot apps do not work at all
Have RPi4b and newest Pi-OS (bookworm) with all updates. Nothing else. installed 3(!) different screenshot tools and none work at all. What is the problem and how can it be fixed?DavidSee...
View ArticleTroubleshooting • Wireguard client connected to ProtonVPN not routing traffic...
Hi All,I have a Raspberry pi 5 (8GB) running bookworm:Code: kdalu@kdalu-rpi:~ $ cat /etc/os-releasePRETTY_NAME="Debian GNU/Linux 12 (bookworm)"NAME="Debian GNU/Linux"VERSION_ID="12"VERSION="12...
View ArticleTroubleshooting • Re: PI5 - Bookworm 12 - VNC
However, I'd like to also connect when I'm outside of my home network.I know I could connect from outside network using cloud connect, which should be possible when both phone and PI are logged into...
View ArticleTroubleshooting • Re: Pi 5 video playback on YouTube fails.
Can you provide a link to the failing YouTube video?This occurs on any YouTube video I attempt to play, but the first video to have this error was this one:...
View ArticleTroubleshooting • Re: Can't boot my Pi 400 from a usb hard drive (mechanical)
I'm using the Ubuntu OS. I installed the Pi Imager and tried to run it by which to switch my boot order per instructions on Tomshardware.com, which says to launch the Pi Imager and then put a new...
View ArticleTroubleshooting • Re: Raspi-config menu not navigating correctly
How are you connecting to the Pi?- USB keyboard- wifi or bluetooth keyboard- remote connection via SSH from a PC with a USB keyboard and terminal emulator (e.g. PuTTY)- something else?Statistics:...
View ArticleTroubleshooting • Re: Freshly imaged SD for Zero2W won't connect to wifi
No ideas? Anyone?I figure this is not a configuration issue, since since it's just the configuration created by the imager specifically for a Zero2W, and when I boot a Pi 3B from said SD card, it...
View ArticleTroubleshooting • UARTS 2,4 Work. UARTS0,1,3, Fail - RPI CM5 + I/O Board
Hi All,So I'll post below some stuff to prove it but, after including all the UARTs in the boot, all UARTs are correcltly recognised on the right GPIOs.Using the 40 pin header I do loopbacks and do...
View ArticleTroubleshooting • Re: UARTS 2,4 Work. UARTS0,1,3, Fail - RPI CM5 + I/O Board
Have you looked at the GPIO function assignments table on page 11 of the CM5 datasheet?You are currently loading overlays for uart5 and uart6, which I don't think exist on the CM5. Those could...
View ArticleTroubleshooting • Re: PI 5 with Build HAT power issue
Thanks kip_the_elder for your reply, although I had mostly figured that out myself. The Build HAT power supply is 48W, which is fairly hefty, but I would assume that how much power is available to the...
View ArticleClik here to view.
Troubleshooting • I have a colored screen
I used my dad's used raspberry pi 3 and I formatted the micro SD card to put Pi OS, it worked fine during like 30 minutes until launched a colored screen, I tried to reboot it but it didn't work, can...
View ArticleTroubleshooting • USB HDD glitching on Pi 400, is it power supply issue?
I transferred an image of the latest 64 bit Pi OS to a Seagate USB HDD, and it boots and runs for awhile, but then glitches. I'm thinking the standard Pi 400 power supply doesn't have enough Watts for...
View ArticleClik here to view.
Troubleshooting • Re: constant freezing with the raspberry pi 5 under any...
Screenshot_20250105_140000_Photos.jpgI'll grab the errors shortly and post the boot diagnostic screenScreenshot_20250105_141401_Photos.jpgso that's 5A at 5.1V = 25.5W -> equal to the official PSU...
View ArticleTroubleshooting • Re: USB HDD glitching on Pi 400, is it power supply issue?
Is fixing that issue as easy as using a Pi 5 power supply with its greater Amps and Watts?Doubt it. The Pi 5 supply will only supply 5V/3A (15W), same as the Pi 400 supply, because the Pi 400 won't...
View ArticleTroubleshooting • Help turning on logging for SCP/SFTP connections
I have a Pi 4, and I want to record SCP and SFTP connections. I understand that who and last will not show those connections because they are not shell creations. So, how do you record those SCP and...
View ArticleTroubleshooting • Re: J2 don't work with Raspberry Pi5
Can you post a picture of the wiring to J2 and the button?I am assuming you are running Raspberry Pi OS 64-bit with desktop - correct?Statistics: Posted by neilgl — Tue Jan 07, 2025 8:29 pm
View ArticleTroubleshooting • Raspberry 5 undervoltage error
Hi,I know that similar topics are already discussed here, but I couldn't find an exact match. I just got a new Raspberry PI 5 4GB model and also an official 5A PSU.When plugging in, I get an...
View ArticleClik here to view.
Troubleshooting • PI5 doesn't turn on after trying a NVME hat
Hello,I received a nice Pi5 with 8GB during the holidays. I ordered the 52pi NVME hat and case and tried to use it but it didn't turn on. Now, even without the hat, the Pi5 doesn'T even turn on. I...
View ArticleTroubleshooting • Wi-fi Issues
I have a PI 3B+ and was trying to install octopi, however when I was setting it up, I noticed the wi-fi chip wasn't being recognized at all, and when I installed Raspberry Pi OS, on the desktop it...
View ArticleTroubleshooting • Re: Wi-fi Issues
Is the WiFi 2.4GHz?What happens if you install stock Raspberry Pi OS on a spare microSD card using Imager, and use Imager OS Customisation settings to set the user, password, WiFi details, country...
View Article