Hello,
my brand new rpi5 suddenly stopped booting, i have only a solid red light on the status led. Nothing displayed on hdmi screen, nothing on serial port, i tried to measure voltage between pin 1 and pin 6 and i got 0 (instead of 3.3v), tried to measure between pin 5 and pin 6 and got 5v as expected.
I tried to boot the official rpios image, nothing.
I tried to reflash the bootloader (as suggested in other threads) using an rpi-imager and an sdcart, waited for more than ten seconds but nothing still a red light and nothing on the display.
I'm using a lenovo usbc laptop charger as power supply, i tried also with another usbc power supply i use as laptop charger too. Used both of them with the rpi in the last two weeks, never had issues until today.
GPIO pins are clear, and i'm using no external modules. The only thing i've attached to this board is a simple serial to usb adapter.
Any hint? It's a dead Jim?
my brand new rpi5 suddenly stopped booting, i have only a solid red light on the status led. Nothing displayed on hdmi screen, nothing on serial port, i tried to measure voltage between pin 1 and pin 6 and i got 0 (instead of 3.3v), tried to measure between pin 5 and pin 6 and got 5v as expected.
I tried to boot the official rpios image, nothing.
I tried to reflash the bootloader (as suggested in other threads) using an rpi-imager and an sdcart, waited for more than ten seconds but nothing still a red light and nothing on the display.
I'm using a lenovo usbc laptop charger as power supply, i tried also with another usbc power supply i use as laptop charger too. Used both of them with the rpi in the last two weeks, never had issues until today.
GPIO pins are clear, and i'm using no external modules. The only thing i've attached to this board is a simple serial to usb adapter.
Any hint? It's a dead Jim?
Statistics: Posted by archipelago — Thu Sep 26, 2024 7:02 pm