Hello,
i must have done something wrong, i dont know it have to e with splash screen
Can't get past the first lines of boot, it stopped there
cmdline.txt
console=serial0,115200 console=tty3 root=PARTUUID=54baa840-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=PT logo.nologo vt.global_cursor_default=0 In this part i changed console=Tty from 1 to 3, changed also "logo.nologo vt.global_cursor_default=0" from quiet splash plymouth.ignore-serial-consoles
config.txt
# For more options and information see
# http://rptl.io/configtxt
# Some settings may impact device functionality. See link above for details
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
# Additional overlays and parameters are documented
# /boot/firmware/overlays/README
# Automatically load overlays for detected cameras
camera_auto_detect=1
# Automatically load overlays for detected DSI displays
display_auto_detect=1
# Automatically load initramfs files, if found
auto_initramfs=1
# Enable DRM VC4 V3D driver
dtoverlay=vc4-kms-v3d,composite
max_framebuffers=2
# Don't have the firmware create an initial video= setting in cmdline.txt.
# Use the kernel's default instead.
disable_fw_kms_setup=1
# Run in 64-bit mode
arm_64bit=1
# Disable compensation for displays with overscan
disable_overscan=1
# Run as fast as firmware / board allows
arm_boost=1
kernel=kernel8.img
[cm4]
# Enable host mode on the 2711 built-in XHCI USB controller.
# This line should be removed if the legacy DWC2 controller is required
# (e.g. for USB device mode) or if USB support is not required.
otg_mode=1
[all]
Well i was trying to put a resolution of 1280*720 but i can't. My Tv is HD ready (720p) and i can't manage it to work.
Do not know how to do to make it work. I installed first Retropie, and in Retropie i installed Raspberry OS. I have Raspberry 5 4Gb Ram.
Thank you to the kind soul that can solve this. I had already my arcade machine ready and now this happens...
![Image]()
i must have done something wrong, i dont know it have to e with splash screen
Can't get past the first lines of boot, it stopped there
cmdline.txt
console=serial0,115200 console=tty3 root=PARTUUID=54baa840-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=PT logo.nologo vt.global_cursor_default=0 In this part i changed console=Tty from 1 to 3, changed also "logo.nologo vt.global_cursor_default=0" from quiet splash plymouth.ignore-serial-consoles
config.txt
# For more options and information see
# http://rptl.io/configtxt
# Some settings may impact device functionality. See link above for details
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
# Additional overlays and parameters are documented
# /boot/firmware/overlays/README
# Automatically load overlays for detected cameras
camera_auto_detect=1
# Automatically load overlays for detected DSI displays
display_auto_detect=1
# Automatically load initramfs files, if found
auto_initramfs=1
# Enable DRM VC4 V3D driver
dtoverlay=vc4-kms-v3d,composite
max_framebuffers=2
# Don't have the firmware create an initial video= setting in cmdline.txt.
# Use the kernel's default instead.
disable_fw_kms_setup=1
# Run in 64-bit mode
arm_64bit=1
# Disable compensation for displays with overscan
disable_overscan=1
# Run as fast as firmware / board allows
arm_boost=1
kernel=kernel8.img
[cm4]
# Enable host mode on the 2711 built-in XHCI USB controller.
# This line should be removed if the legacy DWC2 controller is required
# (e.g. for USB device mode) or if USB support is not required.
otg_mode=1
[all]
Well i was trying to put a resolution of 1280*720 but i can't. My Tv is HD ready (720p) and i can't manage it to work.
Do not know how to do to make it work. I installed first Retropie, and in Retropie i installed Raspberry OS. I have Raspberry 5 4Gb Ram.
Thank you to the kind soul that can solve this. I had already my arcade machine ready and now this happens...
Statistics: Posted by Darks0ld13r — Wed May 22, 2024 10:05 pm