Clik here to view.
Troubleshooting • Re: need a layout or screen shot of the available screen...
Thank you for the reply, I am not that knowledgeable so I think I probably mislabeled what I needed. I took a screenshot of the menu screen attached below in the last screen it shows all the different...
View ArticleTroubleshooting • Re: Pi 5 Bookworm NTFS does not work
There was a bug with ntfs and 16k pagesize that has been fixed.Adding to config.txtCode: kernel=kernel8.imgworks around the issue.I don't think the fix has reached the apt kernel (it is in...
View ArticleTroubleshooting • Re: Bookworm feedback thread
Judging by the number of issues with Bookworm (reported here and elsewhere), I think the development team should do themselves a favour and withdraw it completely. If they still feel a need for an...
View ArticleTroubleshooting • Re: PI 5 OS error mesages
Something is a bit unusual with your apt setup. I wouldn't expect those two versions to be available for the same release of Raspberry Pi OS.Could you post the output from "apt policy libsdl2-2.0-0"...
View ArticleTroubleshooting • Re: Which kernel to roll back to?
I 'm not questioning the use of 2 colons, I'm questioning the use 2 types of colon. Did a developer accidentaly enter a UTF16 a789 modified colon instead of a UTF8 ea 9e 89 normal colon?I suspect it...
View ArticleTroubleshooting • Re: Wifi not working in headless installation (Pi 0W)
Maybe the PI0 wifi module got broken and since i cannot connect to the pi directly we can't know for sure, anyways thank you for trying to help me.Statistics: Posted by luis? — Tue Aug 13, 2024 5:13 pm
View ArticleTroubleshooting • sshpass, scp and sftp on Bookworm
Local host is a Pi 4B running BookwormLocal hostname is txtouch.localRemote host is an Analog Devices PlutoSDR Revision C/DRemote hostname is pluto.localscp requires /usr/libexec/sftp-server, but...
View ArticleTroubleshooting • Re: Running Bullseye, did a update and now VLC has problems.
Yes, there was an update to pi repo vlc that seems to have broken hw decode. It's being looked into.Ok, thanks.Statistics: Posted by Undertow — Tue Aug 13, 2024 5:51 pm
View ArticleTroubleshooting • Re: sshpass, scp and sftp on Bookworm
https://www.google.com/search?q=how+to+ ... ys+for+ssh... and forget about that sshpassStatistics: Posted by redvli — Tue Aug 13, 2024 5:53 pm
View ArticleTroubleshooting • Re: Have I destroyed my Pi 5?
Ok, so I'm pretty sure my USB ports are not working correctly.I just tried flashing an operating system to a USB stick and inserted it into the Pi and booted up, got the same message as above:"Boot...
View ArticleTroubleshooting • Re: Connecting zero 2 W with ssh not working
Checked it this morning and ssh & ping gone. Ran code above and immediately checked. Back on. Think it's something with the pi. I DO NOT lose interenet connection as every 10 minutes it goes out...
View ArticleTroubleshooting • Re: Help with vpython on IP 4
Yes I did do the ones suggested and it still failedWhat, specifically, did you do?How, specifically, did they fail?Using pip to install vpython into a Python virtual environment worked for me....
View ArticleTroubleshooting • Re: PXE boot: error dhcpcd-run-hooks
The relevant dnsmasq statements I use are:Code: log-dhcpenable-tftptftp-root=/srv/tftpbootpxe-service=0,"Raspberry Pi Boot"dhcpcd shouldn't be there as the RPi firmware configures the network...
View ArticleClik here to view.
Troubleshooting • Re: USB ports are dead on a Raspberry Pi 4 4GB
Fixed it in the end So in total I replaced both chips and also quartz crystals next to them on both sides, then also replaced a diode next to the Ethernet port and USB 3 and two chips that look like...
View ArticleTroubleshooting • Location of fan1_input
I can see the fan speed on a Pi 5 in an official case by reading Code: /sys/devices/platform/cooling_fan/hwmon/hwmon?/fan1_inputSo far I have observed ? to be 1, 2 or 3 after rebooting. Is that value...
View ArticleTroubleshooting • Re: Location of fan1_input
Why is it of interrest?Yes, can vary, depending which other devices of your setup have hwmon capabilities.Below is a setup where the NVMe temperature sensor is there in additionCode: pi@Pi5-4-SN530:~...
View ArticleTroubleshooting • Using USB RFID card reader with Raspberry Pi 5
Hi,I could not operate the card reader in the image I added with RPI 5. I'm looking forward to your tips on how to make it work, or if this reader is incompatible, your suggestion for a reader that is...
View ArticleTroubleshooting • I2C - Pull up issue
I am working on an I2C project using the PI 5 with some sensors. One of the sensors operates at VCC 5V and I accidentally connected the SCL/SDA line from the PI to the 5V. I removed the connections...
View ArticleTroubleshooting • Configuration and graphics performance issue after...
Hi everyone,I'm facing a serious problem with my Raspberry Pi 4 and would appreciate any help or advice.**Initial situation:**I was having audio issues that I couldn't solve, and after trying several...
View ArticleTroubleshooting • Re: [Solved/explained] RPi 5 mounting error of portable...
Thanks! redvli for the hint, where to find the configuration file for the kernel: in the /boot map.As in this map two kernel images are stored, also two config files can be found. Looking into these...
View Article