Troubleshooting • Re: Raspberry Pi 5 PCIe issues using geekworm X1001

I am also having issues getting this to work.

lspci is showing and entry for the drive (San Disk WesterDigital SN770)

lsblk is not showing the drive.

activity light is solid blue... so the board is getting powered.... but does not seem to be talking. Currently it is failing to boot via PCIE and is coming up on the SD.

I followed this tutorial (https://www.jeffgeerling.com/blog/2023/ ... berry-pi-5)

Added the entry to the firmware/config.txt
# Add to bottom of /boot/firmware/config.txt
dtparam=pciex1

changed boot order to
BOOT_ORDER=0x416
and added
PCIE_PROBE=1

Drive was imaged with 64bit with applications using the Raspberry Pi Imager 1.8.5 on a Mac

Statistics: Posted by Tmortn — Wed Mar 27, 2024 9:58 pm

---