The board boots fine off microsd. I want to boot off usb.Presumably you are asking because it won't boot?
How are you adapting your usb mass storage device for connection to the micro-usb port on the RPi02W?
Are you using the correct micro-usb port on the RPi02W? (The one to the right, nearest the CSI connector, is for Power In only and will not work for this purpose.)
I'm using a carrier board (https://vi.aliexpress.com/item/10050036 ... pt=glo2vnm) so the usb port's not the issue but further to that this deatils the process to activate https://www.raspberrypi.com/documentati ... e-with-otp clearly stating "If the output reads 0x3020000a, the OTP has been successfully programmed. If you see different output, try the programming procedure again."
My output does not read 0x3020000a therefore I cannot expect it to boot off usb
Network boot's not possible on the Zero 2 so far as I'm aware
Statistics: Posted by ojay — Wed Nov 06, 2024 11:44 am