We used these cables: https://www.amazon.com/Fasgear-Delivery ... r=8-3&th=1 (rated for 5A) and cut them to access their power and ground lines and then we powered it through the Pi's USB-C port. We probed the 5V line using the Pi's 5V GPIO on the 40-pin header.
I'll have to check if we might have been using low quality wires in other parts of our setup.
I'll have to check if we might have been using low quality wires in other parts of our setup.
Statistics: Posted by itsarune — Wed May 29, 2024 5:06 am